Marker Duke 2007-2008
Backcountry Skiing Alpine Touring Binding
SHOP FOR MARKER DUKE BINDING
[leave a blog comment about this binding]
If you've been backcountry skiing for thirty years, you wondered why. If you've been seeking adventure skiing for twenty years you also wondered -- and if you're new to the game you probably still asked the question: Why can't they just make an alpine binding with a touring pivot, and be done with it? Why do all randonnee bindings compromise downhill performance to such a degree?
Wonder no more. This season (07-08), Marker has released the Duke, their incredible no-compromise downhill-oriented touring binding. This grabber does one thing, and it appears to do it well: While in alpine mode, Duke is a randonnee touring binding that may even exceed the downhill performance of many full-on alpine bindings.
 |
Complete Marker Duke binding shown above. Binding is in tour mode with climbing lift in up position. Please click photo for larger version or click here for zoom presentation.
Duke is a "frame" or "plate" binding that uses a carbon plastic structure to connect the toe and heel, so the whole unit can hinge on a toe pivot and provide a walking function. Difference is that the frame is wider, very rigid, and latches in a firm system of slots with many times the engagement area of any other rando binding. |
| |
 |
As shown above, latch in middle of plate is moved up and down to slide the plate for/aft in a system of catches. The binding plate slides back 35 mm when you go to touring mode, resulting in a rearward position while touring unless you slide the plate forward and re-lock the latch while keeping the heel disengaged. We're not sure locking the plate forward in touring mode is a legit way of operating the binding, but it seems to work. Also, being 35 mm back while touring is usually not a big deal, at times it can make kick turns more difficult, and help at other times. (Note that this binding makes no compromise in ALPINE performance. It does a bit of compromise in touring mode, such as the need to exit the binding to change between latched and unlatched.)
See the binding in action on our videos:
Large Marker Duke video
Smaller Marker Duke video
|
| |
 |
| These are the catches under the heel that engage with a plate on the ski. Incredibly solid -- virtually no play when in alpine mode. |
| |
 |
| Above, plate on ski is what engages under the heel. The way this system works should make this binding very easy to home-mount without a template or jig. The toe unit is completely integrated, just place on ski, center, mark holes, drill and screw. Then locate the heel plate by fitting under the binding frame, center with care, mark the screw holes, run those screws in and off you go. We'll eventually provide a home mounting template -- but before we do that we need to make sure the retail bindings have same hole pattern as our samples. |
| |
 |
An innovative height adjustment system is one thing that allows Duke to be extra beefy. Most AT bindings with a toe jaw allow for height adjustment by raising and lowering the toe jaw wings with a threaded system. This means the toe can't be firmly fixed to the ski. To solve that problem, Duke tow jaws are firmly mounted, and height adjustment is done by rotating a threaded rod that raised and lowers the AFD under the boot toe. It moves vertically because it's slotted into an inclined ramp on botch sides, and slides up and down the ramp.
Note that side (lateral) safety release is done by the toe unit, and is effected by the toe wings moving out to the side, as with most alpine bindings. |
| |
 |
| The binding plate slides for and aft by virtue of this track and flange system under the toe. Though this has potential to wobble, it appears to be made with tight tolerances and has little to no movement. Also note the snap ring on a removable and presumably serviceable pivot axle. |
| |
 |
| Clear winner of the DIN "mine is bigger than yours" wars, Duke dials to DIN 16, and shows its DIN pride with this red painted spring that is beefy enough to use in my Jeep suspension. Set the binding to DIN 16, and enjoy leaving your foot and ski behind if you take beater. Ouch. |
| |
Overall, the Duke is designed with a wider footprint that blends well with today's wider skis. This stately stance is said to provide more edge control than other bindings. That might be a bit of hype, but after skiing these and bench testing the flex, I can say they're easily the stiffest AT binding available (meaning laterally, as if pushing the boot cuff from side to side).
Crit? Yes Virginia, you have to exit the binding to change modes, and the heel lifter is difficult to flip while you're touring. Angle of pivot in touring mode is limited to 90 degrees when the toe unit encounters the ski. This makes the binding vulnerable to damage in a "knee fall" while touring (as when you pitch forward with your knee trying to go down on a ski and thus yank the binding plate violently forward). Also, they're heavy at 47 ounces per binding, and thus a poor choice if you're serious about climbing and don't tend to break bindings.
And what about the name "Duke?" What would John Wayne think? In my opinion this is equipment that redefines macho, so the name doesn't insult the ultimate man's man -- thus we're okay there. At least they didn't, groan, call them "freeride."
For most of us, Duke is too heavy for ski touring with major vertical (we won't be trading in our Dynafits), but it looks like the perfect cross-over binding. In other words, this impressive engineering effort could become incredibly popular. At the resort it probably performs as good or better than most alpine bindings -- ditto for heli skiing or snowcat skiing -- and if you do want to tour you've got the machinery to do it. Thus, this could be the ultimate "one-rig" binding for modern resort skiers who make short stabs into the wild.
More, there is a population of backcountry skiers who will make major sacrifices in uphill comfort and energy expenditure to carry beefy gear that holds up for high speed skiing, cliff hucking, film stunts and other shenanigans. For them, Duke could be nirvana. Who knows, such backcountry hucksters might even start watching John Wayne movies. They can start with "True Grit" and work their way up (or down, as the case may be).
|
In all, we're stunned at the finish and function of the Duke binding. This is an excellent example of how design, engineering and materials science continue to converge and sometimes improve our lives.
Weight (one binding with screws): 47.1 oz, 1334 gr
Stack height (boot above ski), heel 40 mm, toe 32 mm for positive ramp angle of 8 mm
See the binding in action on our videos:
Large Marker Duke video
Smaller Marker Duke video
SHOP FOR MARKER DUKE BINDING
|
(All material on this website is copyrighted. Permission is required for any reproduction, electronic or otherwise. Recreation is dangerous -- you may be killed or severely injured if you choose to do backcountry skiing, 4-wheeling, four wheel drive trails, hiking, driving, or any other back country sport. All information on this website is intended only as general information for a variety of aspects of outdoor activities including backcountry skiing. While the authors and editors of the information in this website make every effort to present useful information, due to human error and passing time, information within this website may be inaccurate, false, or out-of-date. You agree to use any information, maps, photos, or binding mounting instuctions or templatates with care and at your own risk, and waive Wildsnow.com its owners and contributors of any liability. Backcountry skiing and snowboarding are spoken here.)
