Comments on: Dynafit Radical Screw Hole Pattern — And Ski Inserts http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/ Backcountry Skiing Weblog Blog, FAQs, more, links and info about randonnee, telemark and backcountry ski mountaineering. Sat, 18 May 2013 05:40:51 +0000 hourly 1 http://wordpress.org/?v=3.3.2 By: Pat http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/#comment-49402 Pat Wed, 26 Dec 2012 18:46:26 +0000 http://www.wildsnow.com/?p=4809#comment-49402 Hey Lou, I'm wondering when you switch from Vertical ST to Radical if you need to drill 2 or 4 new holes to mount the toe...(Do you know if the aft toe holes from the radical and vertical match up)? Hey Lou,

I’m wondering when you switch from Vertical ST to Radical if you need to drill 2 or 4 new holes to mount the toe…(Do you know if the aft toe holes from the radical and vertical match up)?

]]> By: Lou Dawson http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/#comment-47686 Lou Dawson Wed, 31 Oct 2012 23:08:35 +0000 http://www.wildsnow.com/?p=4809#comment-47686 Deeper holes, no problem, but use epoxy and don't over tighten the screws... Deeper holes, no problem, but use epoxy and don’t over tighten the screws…

]]> By: Tyler B http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/#comment-47682 Tyler B Wed, 31 Oct 2012 20:14:56 +0000 http://www.wildsnow.com/?p=4809#comment-47682 Great! Thanks Lou. If the old holes are longer would that matter? Great! Thanks Lou.

If the old holes are longer would that matter?

]]> By: Lou Dawson http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/#comment-47681 Lou Dawson Wed, 31 Oct 2012 19:57:39 +0000 http://www.wildsnow.com/?p=4809#comment-47681 Tyler, the diameter and head shape of the screws is the same. The length might be quite a bit different. All you have to do is evaluate the screws per thickness of the ski and hole depth. If they'll work, they'll work, but they might be too long. Lou Tyler, the diameter and head shape of the screws is the same. The length might be quite a bit different. All you have to do is evaluate the screws per thickness of the ski and hole depth. If they’ll work, they’ll work, but they might be too long. Lou

]]> By: Tyler B http://www.wildsnow.com/4809/dynafit-radical-screw-hole-pattern/#comment-47680 Tyler B Wed, 31 Oct 2012 19:52:05 +0000 http://www.wildsnow.com/?p=4809#comment-47680 Hey Lou, I was hoping to mount some TLT Speed Classics where my Vertical ST sit on my Vectors. They should have the same hole pattern but I was curious if the screws are identical? Would you see any problem for pullling off the Vertical ST binders and putting in some Classic Speeds? Thanks. Tyler Hey Lou,

I was hoping to mount some TLT Speed Classics where my Vertical ST sit on my Vectors. They should have the same hole pattern but I was curious if the screws are identical? Would you see any problem for pullling off the Vertical ST binders and putting in some Classic Speeds?

Thanks.

Tyler

]]>