Comments on: Dynafit Manaslu Binding Inserts http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/ Backcountry Skiing Weblog Blog, FAQs, more, links and info about randonnee, telemark and backcountry ski mountaineering. Thu, 09 Feb 2012 17:16:41 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Lou http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/comment-page-1/#comment-42483 Lou Sat, 28 Jan 2012 02:34:29 +0000 http://www.wildsnow.com/?p=1307#comment-42483 I'd just squirt a bit of Gorilla glue in each hole, to prevent water from getting in there and freezing... I’d just squirt a bit of Gorilla glue in each hole, to prevent water from getting in there and freezing…

]]> By: Stacey http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/comment-page-1/#comment-42481 Stacey Sat, 28 Jan 2012 01:57:15 +0000 http://www.wildsnow.com/?p=1307#comment-42481 Hey!! I just got a pair of the Mustagh ATA superlight, with G3 Onyx bindings, and need to remount the bindings for a smaller boot. Do I need to fill in the holes?? If so, with what??? : ) thanks Hey!!
I just got a pair of the Mustagh ATA superlight, with G3 Onyx bindings, and need to remount the bindings for a smaller boot. Do I need to fill in the holes?? If so, with what??? : )
thanks

]]> By: Lou http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/comment-page-1/#comment-41436 Lou Fri, 23 Dec 2011 19:37:49 +0000 http://www.wildsnow.com/?p=1307#comment-41436 Wood glue won't hurt anything. Sounds weird however. I'd go for the position that puts you slightly aft. Lou Wood glue won’t hurt anything. Sounds weird however.

I’d go for the position that puts you slightly aft.

Lou

]]> By: Keith de Wit http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/comment-page-1/#comment-41434 Keith de Wit Fri, 23 Dec 2011 18:32:58 +0000 http://www.wildsnow.com/?p=1307#comment-41434 I am getting a pair of stokes with ST's. A shop friend recommended WOOD GLUE in the inserts. Good idea? Also, any comment on the fore or aft toe position for a 310 BSL? It is right on the border but would be aft per the Dynafit guide. I am getting a pair of stokes with ST’s. A shop friend recommended WOOD GLUE in the inserts. Good idea?
Also, any comment on the fore or aft toe position for a 310 BSL? It is right on the border but would be aft per the Dynafit guide.

]]> By: Lou http://www.wildsnow.com/1307/dynafit-skis-bindings-mounting-manaslu/comment-page-1/#comment-34007 Lou Fri, 11 Mar 2011 13:47:27 +0000 http://www.wildsnow.com/?p=1307#comment-34007 Jordy, use the front set of inserts and drill new holes for the heel unit. Do a careful mount job and use epoxy. So long as you're not leaping off 74 foot cliffs the binding should hold up fine. This assuming your new holes will still be located in the Titanal binding reinforcement plate. If not, I don't recommend doing the mount unless use of the skis is light duty. Jordy, use the front set of inserts and drill new holes for the heel unit. Do a careful mount job and use epoxy. So long as you’re not leaping off 74 foot cliffs the binding should hold up fine. This assuming your new holes will still be located in the Titanal binding reinforcement plate. If not, I don’t recommend doing the mount unless use of the skis is light duty.

]]>